Home / SAAB 96 V4 Rally Car

SAAB 96 V4 Rally Car

SOLD!
£9150
Posted 27.04.2010 in

Classic & Vintage cars for sale

A veritable Aladdin’s Cave is opened up to all SAAB and classic car enthusiasts … join the SAAB team in November on the Roger Albert Clark Rally.

RALLY SAAB 96 V4 1972
Briefly what’s on offer is:- A fully prepped shell (painted in the white and blue of the Finnish SAAB Team) with Safety Devices multi point cage, works spec big engine (1.8 ltr) and works close ratio gearbox with limited slip diff, handmade free flow exhaust, and competition suspension.

The car comes with a kit of parts that allows you to decide from the following options:-

Carburettors
a) 40dfi (Yep Rocking Horse DoDa) on the works inlet manifold.
PLUS
b) 2 x Twin 45DCOE on CT manifold cross over manifold

Gearboxes
a) Group 1 gearbox with competition final drive and limited slip diff.
PLUS
b) Spare Group 1 gearbox with competition final drive.

A more detailed specification for the car can be found below:-

1. Laminated windscreen.
2. Autolec battery master cut off switch with diode protection circuit, ext / int switched.
3. Cheese grater front grill with Cibie H4 round headlamp units – 100 W each.
4. Quick release auxiliary bracket with option to use 2 no. Cibie Super Oscar drive lamps – 100 W each and 2 no. Lucas fog’s 50 W each (circa 1972).
5. Steel sumpguard with SAAB Sport and Rally style brackets securing guard to inner wing.
6. Front shock absorbers – Sachs competition units (rose jointed), rear shocks Bilstein competition units.
7. Front road springs – SAAB works forest specification.
8. Anti roll bar removed to assist traction during cornering.
9. Front upper + lower wishbones strengthened as recommended by SAAB Competitions Dept.
10. Suspension geometry adjusted to + ¼ degree camber and + 2 degrees caster (improved handling).
11. Suspension turrets and inner wings strengthened as recommended by SAAB Competitions Dept.
12. 8 off 4 ½ SAAB Sport & Rally steel wheels.
13. Hand-made free flow (based on SAAB Sport & Rally competition exhaust), exiting the engine bay through holes cut in floor to the rear of the engine bay.
14. Bonnet converted from front hinge type to complete lift off with bonnet pins.
15. Front bulkhead fire proofed with GRP.
16. Twin air horns installed.
17. Hole cut in middle of battery tray for serviceability to N/S suspension turret.
18. Mexico Style competition engine mounts.
19. Central stay in engine bay strengthened @ juncture with inner wings & converted into additional engine mount, securing gearbox bellhousing as per later works specification rallycross cars.
20. Sports HT coil & spare coil alongside.
21. Up-rated 55amp/hr alternator.
22. Works type radiator and expansion box.
23. Competition front disc pads with dust shields bent to flow air over discs.
24. Perspex rear side windows.
25. Rear axle drop straps shortened.
26. Std. Fuel pump removed & mounting face blanked off. 2 no. electric high pressure fuel pumps installed (switchable from one to another) in boot area. Goodrich fuel pipe throughout.

INSIDE

27. Full Safety Devices roll cage mounted onto strengthened floor pan.
28. Rev counter.
29. Air horn switch mounted centrally on dash for driver / co-driver use.
30. Mountney 14 steering wheel.
31. Internal connections to battery master switch & fire extinguisher.
32. Brants Retro Trip.
33. 2 no. additional map pockets.(co-drivers side).
34. Fly off handbrake.
35. 2 no. full 4 point racing harnesses.
36. 2 no. competition bucket seats.
37. 1 no. fluorescent tube light.
38. 1 no. Don Barrow map magnifier with 12 v connection.
39. 1 no. 1st aid kit + red warning triangle + SOS board.
40. All internal sound deadening + rear seat / bulkhead modified / parcel shelf plus majority of internal trim removed (lightened shell) as per group 5 specification.
41. Rear suspension turrets strengthened.
42. Fuel tank area fire proofed & steel plated.
43. Spare wheel moved & secured to steel plated bulkhead above fuel tank.

ENGINE DETAILS

1. Cylinder head flowed and ported with large valves (42mm inlet / 37mm exhaust). Valve springs uprated (S&R). Heads milled 1mm off face which with V6 pistons give compression ratio to 8.94:1, with head combustion chamber of 42.0cc.
2. Modified Ford V6 competition head gaskets. 1.5mm head gaskets compressing to 1.25mm gives gasket space capacity of 8.8cc.
3. 1700cc competition stroked crank (66.8mm stroke).
4. 7.6 SAAB rally cam with lightened std. followers with 11.5mm lift.
5. Lightened flywheel as per (Sport & Rally), 16.1 lbs to 12.8 lbs.
6. Up-rated oil pump spring (Sport & Rally).
7. Steel balance shaft gear.
8. Exhaust manifold ports increased to 44mm.
9. Competition clutch cover (with stronger springs) and competition linings.

ALL THE ABOVE FOR JUST £9,150

Our users value for money rating
Value for Money: 
No votes yet
StigBlomqvist
Yorkshire, United Kingdom

Contact Seller

Similar Adverts

Aztec SP-2 sports race car bike or car engine

Posted 25.11.2010 in Race Cars for sale
This car has been designed and developed to accept both bike and car derived engines for racing and track day use. Space frame chassis manufactured from 4130 and T45. 5 piece GRP body work plus front splitter, rear wing and rear diffuser. Engine fitted is latest Suzuki Hayabusa 1340cc – other options are GSX-R 1000, plus 4 cylinder car engines...
£0.00
United Kingdom

Fiat Ritmo 125TC Group B

Posted 30.10.2016 in Rally Cars for Sale
Fiat Ritmo 125TC GROUP B Historic 205Hp 22,5kg torque  Full gr.B homologation, front size 1,70cm and rear 1,66cm, fiberglass front bonnet, front wings and rear bonnet, 2 fuel pumps, full roll bar fia, FIA HTP, pedal box, gearbox bacci homologated, 2 set bilstein front 50 and rear 40 with top mount for gravel and proflex 3way front with bilstein 4...
€38000
Athens, Greece

Rally car full throttle clutchless upshifts & clutchless down shifts

Posted 02.06.2011 in Rally Car Parts for sale
DO YOU HAVE A SEQUENTIAL SHIFT !! Can you do this???? Select 1st gear pull away give full throttle snatch 2nd 3rd 4th 5th 6th not once coming of full throttle or touching the clutch, corner approaching left foot braking at the last moment keeping suspension even and balanced to work at its optimum, keep braking ease of throttle snatch 5th 4th 3rd...
£0.00
United Kingdom

kliktronic bike engine gear shifter .

Posted 17.12.2012 in Race Car Parts for sale
Flatshifter Brief product range summary For race cars bike engined cars & any race vehicle fitted with a sequential transmission Hewland ,Sadev Quaife, Elite etc etc. Flatshifter Club system enables Full or part throttle clutchless up gearshifts only.£379.00 Flatshifter Expert Full or part throttle clutchless up gearshifts & (auto throttle...
£599.00
colchester, United Kingdom

Rally car stand alone clutchless downshift system

Posted 10.09.2010 in Rally Car Parts for sale
Flatshifter 'blip' stand alone Clutchless downshift system for all sequential transmissions (autoblip) blips the throttle for your when downshifting exactly the right amount at exactly the correct time ]every time no more heel & toe required works on motorbikes upto v10 engines +44 01206 322557 or www.flatshifter.com SEQUENTIAL SHIFT !! Can yo...
£725.00
COLCHESTER, United Kingdom
SOLD!

SAAB 96 V4 Rally Car

Posted 27.04.2010 in Rally Cars for Sale
A veritable Aladdin’s Cave is opened up to all SAAB and classic car enthusiasts … join the SAAB team in November on the Roger Albert Clark Rally. RALLY SAAB 96 V4 1972 Briefly what’s on offer is:- A fully prepped shell (painted in the white and blue of the Finnish SAAB Team) with Safety Devices multi point cage, works spec big engine (1.8 lt...
£9150
Yorkshire, United Kingdom

Saab 99 Turbo

Posted 16.06.2016 in Classic & Vintage cars for sale
Saab 99 Turbo, 2dr rust free shell, fully triangulated roll cage, big suspension turrets, wide arches, strengthened wishbones, Ohlins suspension, coilovers, big brakes, brake bias pedal box, 8x15 compomotive alloys, aluminium firewall, WRC stands,  Engine: B202 16 valve, woosener pistons, tubular manifold, precision 62x62 turbo,3" stainless exh...
£8000+
Londonderry, United Kingdom
SOLD!

285 bhp saab turbo westfield SOLD

SOLD in current tune its outputing 285bhp with about 300 nm of tourque below gives you an idea on what can be done to the engine, if the car isnt quick enough lol [URL=http://www.youtube.com/watch?v=w24YkiV1IN4]http://www.youtube.com/watch?... [URL=http://www.youtube.com/watch?v=w9mbwSZ62iY]http://www.youtube.com/watch?... this is where they start ...
SOLD

hillman imp competition exhaust

Posted 08.03.2009 in Rally Car Parts for sale
GRP6 works type exhaust link pipe allows fitting of rear bumper, in stainless steel, fits 52mm outlet from janspeed twin 40 manifold and from large bore janspeed type exhaust manifold, popular to fit bike cans onto these link pipes. The increased tuned length increases torque at bottom end of power range and allows for better silencing. ...
£45
© 2006-2024 Raced & Rallied
Classifieds web design by eConcepts.co.uk
Customize This