Home / throttlebodied 106 track/race car

throttlebodied 106 track/race car

11250.00 ovno

This is the for sale thread of my 106 which i have been building for the last 3 1/2 years. due to being able to purchase my first property ive very reluctantly had to put this vehicle for sale to aid this.
the car has been fully re-build from when i purchased it, completely standard from a dealership in london. When i got the vehicle home it was fully stripped down and re-painted inside/outside and engine bay area in original peugoet black.
the car is far from standard as every part has been uprated, it has just been returned to me from having a full wrl motorsport dr race harness fittedthroughoutthe car includinga new 2d dash display system and had a carbon roof and bonnet developed by streamline carbon fitted.

since purchasing this shell in september 2009 (had my previous shell until then) the car has done around 200 miles including the drive back from northampton to pick it up after having the final stage work done. the car has allwyas been garaged and never has been left outside in all its time ive had it.
this car, in the right hands would be a very capable vehicle whether you were to using it for racing in the tin top series or just are an avid trackday goer like myself. it is more than capable of showing up much larger machinery alover the country.

car specification goes as follows:

chassis.
51 plate 106 gti shell
fully fia approved safety device 12 point roll cage (with welded re-inforcment plates)
streamline carbon,carbon fibre 4x4 twill roof with front and rear carbon roof supports (inside the roof has been completely flocked for a neater finish)
plastics4performance front windows with slider and rear thermoformed screen (rear quarter windows will be sold with car but just not fitted)

engine & transmission
richard longman built tu5jp4/j4 engine with jp4 big valve head with extensive headwork carried out by richard longman
jenvey 42mm twin throttlebodies with sandy brown dcoe inlet manifold and 100mm jenvey carbonfibre trumpets
omega forged high comp pistons and steel rods with uprated arp rod bolts
piper 285 race cams
lightened and blanced flywheel
lightened and balanced bottom end (including crank)
helix cerametaliic 6 sprung race clutch (not as aggressive as you may think)
peugeotsport baffled sump
pug1off built s1 rallye gearbox with high gearing, same as paul wests 2008 106 race car, fitted with a quaiffe atb differential, has done roughly 200 miles.

engine management & wiring harnesses
efi euro 1 engine management system
wrl motorsport dr race looms comprising of engine, interior and dash looms as used by all btcc race cars
olebuhl racing 2d dash display system incorporating all needed sensors and pressures.

interior
recaro pole position driver and passenger seats
sparco 368 steering wheel
safety devices 12 point roll cage
streamline carbon, carbon fibre dorr cards and track day kit
original 106 dash flocked by banbury flocking to a very high standard.
heated front windscreen
fully braided earls brake lines running from the master cylinder to a t peice on the rear bent area to both rear caliper, using stainless fittings and a wilwwod bias valve.
ghost development extra low subframes with recaro side mounts

exterior
fully re painted in original peugoet black
streamline carbon 4x4 twill roof
streamline carbon 4x4 twill bonnet (single skin weighing roughly 2-3kg)
original 106 bodykit
front bumper has had the badge recess smoothed and mouth opened proffesionally

suspension
AST sportline 2 front coilover as used in the stock hatch race series.
AST sportline 2 rear dampers
320lb front springs (eibach)
23mm rear torsion bars
24mm rear anti roll bar
uprated peugeot sport suspensions bushes where applicable.
the front and rear dampers are adjustable by 16 settings to accomadate all different driving styles and conditions

peugeot sport 3''exhaust system
comes with a spare piper 21/2 inch system also.

fuel system
fully integrated earls braided lines using the earls swivel seal fittings
ATL 2 lite fuel swirl pot
standard brand new peugeot in-tank fuel pump
uprated bosch 044 pump (to feed the rail from the swirl pot)
fuel lab inline 4.5 bar fuel pressure regulator
earls 80 micron inline fuel filter located in engine bay.
all the fuel system is running through the car using earls teflon lined fuel hose eliminating fuel vapour release in the cabin, running to the fuel setup on the rear bench.

brakes
hi spec 4 pot calipers (black)
bells with floating 285mm discs
front lines run to a t peice on the bulkhead and to each caliper, completely eliminating abs for better peadl feel.

wheels & tyres
teasm dynamic pro race 1's (the rare ones not the 1.2's) in satin black
front tyres are yokohama A048's in meduim compound and have seen one track session.
rear tyres are toyo R888's in medium compound and have seen 2 track sessions.

now im sure i would of missed a few things of from the list but its hard to remember it all. as you can see the car has been prepared with no expence spared regardless of cost. i never intended to sell the car as i was going to use it in some sort of race series but buying a property will stop that for a while, so rather than see it being wasted sitting in my garage i would rather sell it to someone who would use it for what it was built for.

the car is fully road legal and has mot and tax until september.

im willing to meet any intentional buyers with the car if they are serious as i live in north devon and i know its not the easiest of places to travel to.

on the 17th of july the car will be going down to AST for a full geomerty setup and tracking, everything.

the car is running about 180bhp but would benefit from a mapping sessions as the setup has been altered since that mapping with a new inlet and trumpets so should produce more than the first figure.

the car will be sold with a cd with photographs showing the build process from start to finish to see the transformation, i can not express how many hours have gone into this car let alone how many thousands of pounds have been spent on it.

link to my build thread on the shed motorsport forum:
http://s9.zetaboards.com/Shed_motorsport/topic/712...

please dont hesitate to contact me if you are serious about purchasing the car,
anymore photos wanted just ask as i have hundreds and cant put them all up at once.

thanks dan.

Our users value for money rating
Value for Money: 
5
Average: 5 (1 vote)
dan_106
7879291784
braunton, north devon, United Kingdom

Contact Seller

Similar Adverts

Aztec SP-2 sports race car bike or car engine

Posted 25.11.2010 in Race Cars for sale
This car has been designed and developed to accept both bike and car derived engines for racing and track day use. Space frame chassis manufactured from 4130 and T45. 5 piece GRP body work plus front splitter, rear wing and rear diffuser. Engine fitted is latest Suzuki Hayabusa 1340cc – other options are GSX-R 1000, plus 4 cylinder car engines...
£0.00
United Kingdom

Radical race car quickshifter kits

Posted 05.06.2012 in Race Car Parts for sale
Flatshifter Brief product range summary For race cars bike engined cars & any race vehicle fitted with a sequential transmission Hewland ,Sadev Quaife, Elite etc etc. Flatshifter Club system enables Full or part throttle clutchless up gearshifts only.£379.00 Flatshifter Expert Full or part throttle clutchless up gearshifts & (auto throttle...
£0.00
colchester, United Kingdom

Quickshifter CLUTCH LESS UP & DOWN SHIFTS WITH OUR AUTOBLIP SYSTEM

Posted 26.05.2009 in Rally Car Parts for sale
SEQUENTIAL SHIFT !!Can you do this???? Select 1st gear pull away give full throttle snatch 2nd 3rd 4th 5th 6th not once coming of full throttle or touching the clutch, corner approaching left foot braking at the last moment keeping suspension even and balanced to work at its optimum, keep braking ease of throttle snatch 5th 4th 3rd 2nd gears in...
TBA
COLCHESTER, United Kingdom

k-lever2 motorcycle dual lever system

Posted 28.08.2012 in kit car parts for sale
NEW DUAL LEVER TWIN CLUTCH/BRAKE LEVER. This exciting new innovation from Flatshifter is the perfect solution for motorcycle riders who are unable to use their right foot for rear brake operation or have left or right hand / arm problems . This superb modular design enables independent operation of both front and rear brakes using just one han...
£999.00
colchester, United Kingdom

Paddle shift kits race car sequential transmission.

Posted 02.06.2011 in Race Car Parts for sale
DO YOU HAVE A SEQUENTIAL SHIFT !! Can you do this???? Select 1st gear pull away give full throttle snatch 2nd 3rd 4th 5th 6th not once coming of full throttle or touching the clutch, corner approaching left foot braking at the last moment keeping suspension even and balanced to work at its optimum, keep braking ease of throttle snatch 5th 4th 3rd...
£0.00
United Kingdom
SOLD!

Rear wheel drive Peugeot 205 - 200bhp Sequential

Posted 08.03.2009 in Rally Cars for Sale
Wide arched rear wheel drive Peugeot 205. - Custom cages T45 multipoint cage with x-door bars. - fibreglass arches (front and rear), fibreglass tailgate, front dam, bonnet. - carbon-fibre door cards, carbon-fibre dashboard, carbon-fibre centre console, carbon-fibre WRC roof vent. - perspex side windows, perspex rear window - new composite Corbeau...
£12750

carbon fibre bi plane rear wing downforce

Posted 08.03.2009 in Race Car Parts for sale
carbon fibre bi plane wing to fit gt sports race car ...
£550

race /rally car fuel system

Posted 08.11.2013 in Rally Car Parts for sale
044 bosch fuel pumps £115 each or £95 each if you buy 10 pumps 023 bosch fuel pumps £ 85 each or £ 65 each if you buy 10 pumps works alloy twin fuel pump brackets and banjo set £177 ...
£1
london, United Kingdom

Aluminium Fuel Pump/Fuel Regulator Mounting Brackets

Posted 12.03.2011 in Rally Car Parts for sale
Fuel Pump/Fuel Regulator brackets UK manafactured from 2mm high grade aluminium.Pre drilled for Facet Fuel Pumps and Filter King Regulators Single Fuel Pump bracket £30 + postage.Twin Fuel Pump Bracket £34 + postage. Please note Pumps and Regulator not included.Photo for reference only. Please contact for any further information required. ...
£30 & 34
West Sussex, United Kingdom
© 2006-2024 Raced & Rallied
Classifieds web design by eConcepts.co.uk
Customize This