Home / Rally Cars For Sale / Rally Car Parts For Sale / Cosworth Ford 2.0 BDG Engine

Cosworth Ford 2.0 BDG Engine

US $8500
Posted 15.08.2018 in

Rally Car Parts for sale

This a Ford Cosworth BDG engine in Component form it is effectively all the correct components to build the highest quality race engine including clutch, Starter motor and Slide throttle induction with Carbon air intakes and electronic injection, originally purchased for an abandoned race car project.

The parts are brand new and are as follows

Quaife 90.4mm alloy BDG block.

DKE engineering 72.50 mm Steel billet crankshaft, lightened counter balance, narrow journal, lightened crankpins.

JE 90.4mm forged pistons.

Arrow precision H section narrow pin 5.23" steel connecting rods.

KAM cylinder head Fully ported fitted with Colsibro guides and Beryllium seats 3 stud exhaust pattern for 10 mm spark plugs complete with studs and plugs (As sold by Burtons cost of this alone over £5,000 Inc. vat)

Race Engine Components valves 1.400" inlets REC 256 and1.200" exhausts REC476.

Arrow precision lightweight steel cam followers CF326 andCF325.

Genuine original Cosworth Schmitelm valve springs SH360.3

Valve spring caps collets and platforms (collets andplatforms not shown in photo)

Cylinder head stud, nut kit.

Complete set of Vandervell competition material engine bearings (Mains, Big ends and thrusts)

Steel billet jack shaft including steel thrust plate.

Titan BDG 4 port Dry sump pump.

Steel sump pan with full length scavenge trough.

Front timing cover complete with seals.

Complete set of timing gear Adjustable Alloy cam pulley's, Back drive water pump pulley, Alloy jack shaft pulley, Steel crankshaft pulley, Alloy tensioning and fixed Idler's including posts, studs, and bearings Gates drive belt etc.

BDT alloy water pump.

Rear crankshaft oil seal housing and seal.

BDG Cam Carrier with cam bungs and thrust keys and locating studs.

Cam Cover.

New Ford thermostat housing

Camshafts from new blanks profiles F1 and BLF17.

ARK Racing Starter motor systems Compact light weight 1.4 kw starter motor and super lightweight 235mm steel flywheel for 5.5" clutch.

Tilton 5.5" (140mm) Twin plate lug drive racing clutch complete with twin sintered friction plates suit ford 1" x 23 Spline

Cometic engine gasket set.

Cometic steel multi-layer Cylinder head gasket.

Slide throttle Intake fuel injection system.

Our users value for money rating
Value for Money: 
No votes yet
Sandi121
United States

Contact Seller

Similar Adverts

TVR Power V8 Rover 3.9 engine (complete)

Posted 04.08.2017 in kit car parts for sale
3.9 Vitesse spec Rover V8 engine built by TVR power TVR camshaft and TVR racing valve springs. Holley 390 carb. Electronic ignition Westfield poly vee kit and alternator Remote oil filter assembly TVR cam covers Removed fully working (drove the car from Scotland to the workshop!) from Westfield SEight. Supplied complete as is, rea...
£2950
United Kingdom

Aztec SP-2 sports race car bike or car engine

Posted 25.11.2010 in Race Cars for sale
This car has been designed and developed to accept both bike and car derived engines for racing and track day use. Space frame chassis manufactured from 4130 and T45. 5 piece GRP body work plus front splitter, rear wing and rear diffuser. Engine fitted is latest Suzuki Hayabusa 1340cc – other options are GSX-R 1000, plus 4 cylinder car engines...
£0.00
United Kingdom

Quickshifter CLUTCH LESS UP & DOWN SHIFTS WITH OUR AUTOBLIP SYSTEM

Posted 26.05.2009 in Rally Car Parts for sale
SEQUENTIAL SHIFT !!Can you do this???? Select 1st gear pull away give full throttle snatch 2nd 3rd 4th 5th 6th not once coming of full throttle or touching the clutch, corner approaching left foot braking at the last moment keeping suspension even and balanced to work at its optimum, keep braking ease of throttle snatch 5th 4th 3rd 2nd gears in...
TBA
COLCHESTER, United Kingdom

kliktronic bike engine gear shifter .

Posted 17.12.2012 in Race Car Parts for sale
Flatshifter Brief product range summary For race cars bike engined cars & any race vehicle fitted with a sequential transmission Hewland ,Sadev Quaife, Elite etc etc. Flatshifter Club system enables Full or part throttle clutchless up gearshifts only.£379.00 Flatshifter Expert Full or part throttle clutchless up gearshifts & (auto throttle...
£599.00
colchester, United Kingdom

Throttle blipper clutchless gearshifts race & kit cars

Brief product range summary For racers leisure & disabled riders/drivers Club Full or part throttle clutchless up gearshifts. Expert Full or part throttle clutchless up & clutchless down gearshifts (race version of Pro) Max Electric gearshift system with buttons or Paddles. Paddles For all electric & pneumatic gear shift systems ...
£799.00
COLCHESTER, United Kingdom

Brand New 2.3 Vauxhall XE Type engine, long steel rods, Cosworth Pistons etc

Posted 07.04.2012 in Rally Car Parts for sale
I have a Brand New never run, vauxhall 2.3 XE REDTOP Type engine, using the 10mm taller block all deflashed etc dowelled to head and New long H section 152mm Steel rods, New Cosworth forged pistons, cross drilled 94mm long stroke crank all polished etc, New ARP Bolts, New Steel Flywheel, New oil pump, New water pump and New competition shells, with...
£4500.00 ono
Abergavenny South Wales, United Kingdom

Pinto/cosworth lightweight steel flywheel

Posted 07.01.2011 in Rally Car Parts for sale
Pinto lightweight Steel Flywheel Lightweight steel flywheel, fully complete with ring gear, and dowels for clutch cover. 9 bolt centre for use with cosworth crank, but takes 215mm pinto clutch. 5.5kg in weight, fully balanced. Little use, was well over £200 when new. £100 + P&P Pictures available on request ...
£100
shrewsbury, United Kingdom

ford crossflow water pump and pulley

Posted 08.03.2009 in Rally Car Parts for sale
ford crossflow water pump and multi groove pulley with stainless steel cap head bolts and wire locking. bearings in good order, these pumps are superior to modern equivalants as the pump vane is not pressed tin. ...
£20

2.0 All Steel Duratec Rally/Race Engine

Posted 16.03.2010 in Rally Car Parts for sale
Currently being fully rebuilt at Robspeed, multiple championship winning 2.0 Duratec. All steel ultimate tarmac engine, titan fully dry sumped, titan roller barrel throttle bodies, forged pistons, robspeed full spec head. MBE 967E ecu and loom, AP twin plate clutch.This engine was built new for 2008 season by robspeed, winning the welsh tarmac cham...
£8995
© 2006-2018 Raced & Rallied
Classifieds web design by eConcepts.co.uk
Customize This