Home / Rally Cars For Sale / Rally Car Parts For Sale / Ultimate spec Group A Evo 3 engine by Phil Marks.

Ultimate spec Group A Evo 3 engine by Phil Marks.

SOLD!
£3,250
Posted 03.06.2009 in

Rally Car Parts for sale

Ultimate spec Group A engine by Phil Marks.

Zero miles.
Ralliart head, ex-Makkinen block (allegedly), all steel engine - the complete works. This is the top spec ultimate Phil Marks Group A specification.

The engine made 350bhp and 420ft/lbs running just 1.5bar of boost with the flattest power curve I've seen in my life, over 300bhp for 3000rpm - it's not a curve, it's a wall.

This is my spare engine, the car now relocated to other side of the world so this engine is no longer required. The identical sister engine of this one (two built side-by-side) just won Group A in Rally Barbados' King of the Hill event, beating the modern machinery including an ex-works Subaru 555 Group A car. It has won Group A outright the last two events on the island.

If rallying an Evo 1/2/3, you cannot get a bigger, better engine than this. Engine is full works, even down to machining out the seams on the block. All steel, balance shaft removed, balanced, Ralliart head, uprated valve train, Phil's own cams. etc. etc. Engine comes with induction, runs a jacked throttle. Bolt on your exhaust and turbo and good to go.

Map shown in photo is for *pump* fuel, can supply both maps for pump fuel and VP109 for GEMs. Mapping alone cost £1,200.

For sale, zero miles, £3,250. Engine located in Halifax.

graeme@fluke-motorsport.co.uk

Our users value for money rating
Value for Money: 
No votes yet
Graeme Finlayson
United Kingdom

Contact Seller

Similar Adverts

TVR Power V8 Rover 3.9 engine (complete)

Posted 04.08.2017 in kit car parts for sale
3.9 Vitesse spec Rover V8 engine built by TVR power TVR camshaft and TVR racing valve springs. Holley 390 carb. Electronic ignition Westfield poly vee kit and alternator Remote oil filter assembly TVR cam covers Removed fully working (drove the car from Scotland to the workshop!) from Westfield SEight. Supplied complete as is, rea...
£2950
United Kingdom

kliktronic bike engine gear shifter .

Posted 17.12.2012 in Race Car Parts for sale
Flatshifter Brief product range summary For race cars bike engined cars & any race vehicle fitted with a sequential transmission Hewland ,Sadev Quaife, Elite etc etc. Flatshifter Club system enables Full or part throttle clutchless up gearshifts only.£379.00 Flatshifter Expert Full or part throttle clutchless up gearshifts & (auto throttle...
£599.00
colchester, United Kingdom

Aztec SP-2 sports race car bike or car engine

Posted 25.11.2010 in Race Cars for sale
This car has been designed and developed to accept both bike and car derived engines for racing and track day use. Space frame chassis manufactured from 4130 and T45. 5 piece GRP body work plus front splitter, rear wing and rear diffuser. Engine fitted is latest Suzuki Hayabusa 1340cc – other options are GSX-R 1000, plus 4 cylinder car engines...
£0.00
United Kingdom

motorcycle engine electric gear shifter

Posted 08.03.2009 in Bike engined kit cars for sale
New affordable electric gearshift system, change up and down the gearbox effortlessly at the click of a button or flick of a paddle (optional extra| complete system only £599.00  also available flatshifter expert system (full throttle clutchless upshifts and clutchless downshifts with autoblip £799.00  please go to www.quickshifters.com for ful...
£599.00
COLCHESTER, United Kingdom

Rally car full throttle clutchless upshifts & clutchless down shifts

Posted 02.06.2011 in Rally Car Parts for sale
DO YOU HAVE A SEQUENTIAL SHIFT !! Can you do this???? Select 1st gear pull away give full throttle snatch 2nd 3rd 4th 5th 6th not once coming of full throttle or touching the clutch, corner approaching left foot braking at the last moment keeping suspension even and balanced to work at its optimum, keep braking ease of throttle snatch 5th 4th 3rd...
£0.00
United Kingdom

Crankshaft Mitsubishi Evo \Works Spec\" (Built by Phil Marks)"

Posted 24.08.2011 in Rally Car Parts for sale
For sale is a Mitsubishi Evo 4G63 Crankshaft built by Phil Marks at Works Rally Car Specification, Tommy Makkinen M7MRE. Crank is STD, is advisable to regrind to upper measure 0, 25 mm. 12.9 KG, much Lighter than Standard, very Rare part, to improve your Engine Power like no other! Located in Portugal, can be send anywhere or pick up can be arrange...
£550
Marco de Canaveses, Portugal

SUBARU ENGINE GROUP N+ S12

Posted 12.06.2013 in Rally Car Parts for sale
SUBARU FULL X PRO DRIVE GROUP N+ S12 ENGINE FITTED WITH STEEL RODS, OMEGA PISTONS BRAND NEW STEEL COMPETITION FLYWHEEL JUST BEEN FULLY REBUILD BY FIELD MOTORSPORT TURBO FULLY REBUILD MADE BY IHI SIMTEC ECU COMES WITH 2 MAPS:ONE FOR 34mm RESTRICTOR, ONE FOR 33mm RESTICTOR THIS HAS BEEN DYNO TESTED PLEASE CALL 01245320730 FOR FURTHER INFO AND CAN ...
£8000

cup car engine'd saxo vts...7,000 MILES ON ENGINE!!

Immaculate saxo VTS with 150bhp 16v 106 cup car engine that is a GENUINE 7,000 Miles old. any blemishes are shown in imagesfull service history. All parts standard unless mentioned below:* Full Hand stitched leather interior* 3 point belts* 16' TSW wheels with NO marks* Toyo Proxes 4 months old so loads of life* Piper Stainless steel 4-1 Manifold a...
£2,250 delivered anywhere in UK
Cheltenham, United Kingdom

EVO X Group N Engine

Posted 14.05.2015 in Rally Car Parts for sale
Group N Evo X Engine for sale. 400 SS/km from New. Net price. Can be delivered worldwide at extra cost. Engine in LATVIA - EU. ...
€3000
Riga, Latvia
© 2006-2018 Raced & Rallied
Classifieds web design by eConcepts.co.uk
Customize This